10 x 12 cedar sauna
An outdoor electric sauna with U-shaped cedar seating and a removable cleaning step.
- Steps
- 19
- Configurations
- 1
- Skill level
- advanced
37 plans
An outdoor electric sauna with U-shaped cedar seating and a removable cleaning step.
A 192-square-foot shed with front double doors and a gable roof. Choose a side window and entry door, or a solid side wall.
A2 x 4 rack for twelve lip-hung storage totes, three wide and four high.
A covered chicken run with a raised henhouse, outside nest boxes, wide cleaning access and a buried mesh barrier.
Keep split firewood raised and ventilated beneath a shallow roof. An open-front timber shed with a slatted floor and sides.
An 8×8 shed with a concrete floor, two windows and a left-hinged door that opens clear of the front window.
A broad plywood and cedar box with a 6 x 7 in entrance, twenty drain holes and a hinged roof lid.
Build a ten-frame hive with one deep body, one medium super, a removable entrance reducer and a metal-covered lid.
An open timber holder with a brush-inspired top.
A low A-frame form with two sloping timber faces.
Build a wooden bat roost.
A covered farm stand with two folding sales counters and a side display shelf.
A five-foot square sandbox built from standard nominal lumber, with a draining plank floor and four sturdy corner caps.
A cedar nest box with drainage and accessible cleaning.
A 24-foot interpretation of Donald Judd’s Pergola Table 23, with a five-board top, four timber frames and six inset seats.
Gambrel shed plans in ten sizes, with a storage loft, T1-11 siding, double doors and illustrated assembly instructions.

Cedar garden planters with illustrated steps, cut lists and matching CAD.
A 10 x 12 foot gambrel tool shed with lettered rafter cutting patterns.
A cedar nest box with drainage and accessible cleaning.

A six-foot interpretation of Donald Judd’s Pergola Table 23, with a broad four-board top, inset benches and a square timber frame.
Six natural-timber rails with four-sided support beneath each standard.
A wooden house for 4–6 hens with a covered walk-in run, continuous 6×6 posts, two cleanout doors, two nest bays, an Omlet door and two camera mounting pads.
Build two 22-in-high sawhorses with 36 × 6-in replaceable caps and an 18-in foot spread.
A six-foot picnic table with two separate movable benches.
An 8×8-foot timber house with separate interior layouts for hens, bantams, pigeons or a brooder.
A plywood birdhouse with eight compartments per level, a removable roof and a central air shaft.
An open cedar nesting shelf with two shaped supports and a sloping roof.
A three-post shelter concept with a curved waterproof membrane roof and eight Blender views.
A 6-foot wooden picnic table with two attached benches and five tabletop slats.
Compact cedar roost box with six interior perches and a side that pivots open for cleaning.
A cedar nest box with a sheltered entry, internal baffle, landing ledge and side cleaning door.
Three separate suet feeder builds: a skillet-covered log, a slatted column, and a clip-on cedar cup.
A three-foot-high mini ramp in 8ft, 12ft and 24ft widths, with a choice of Gator Skins or Skatelite Pro top surface.
Two portable timber standards and three pale rails.
A cedar nest box with drainage and accessible cleaning.
A cedar nest box with drainage and accessible cleaning.